Product Specifications
- Product Name：PE收縮膜
- Product Categories：PE收縮膜
- Number：PE收縮膜
- Specification：
- Material：
- Applicable：
- Characteristic：
Details
PE收縮膜（袋）：是最為廣泛、用量最大的一種收縮膜，適合于組合包裝、大型物體收縮包裝的常用塑料包裝材料，如常見的可樂24、支裝礦泉水15-24、集合包裝。
特點：透明好、韌性強、耐寒,熱收縮率大，并且在制作包裝過程中不會產生有毒害的氣體,屬于全球許可使用的環保熱收縮膜。
用途：適用于食品、飲料、冷凍品、醫藥、日用品、玩具、化妝品、輕工五金、工業制品、機械設備等。
產品技術特點： 塑料膜厚度規格是:從40μ至200μ內按需要生產。
縱向熱收縮率50%至75%以?xún)?nèi)。
橫向熱收縮率10%至30%以?xún)?nèi)。
國家執行標準號：GB/T13519-1992
產品形式：可分為片料和筒料兩種，片料寬度在不超4000毫米(mm)內可自由設定，筒料最少規格在20毫米(mm)---2000毫米(mm)內根據需要生產，制袋是制成規格平口（直線）袋或直通袋（長度兩或單邊為焊口），焊接位需為2毫米(mm)寬以上的焊邊才能保證收縮過程不爆口.
應用要求：在1200毫米(mm)加熱烘道式帶恒溫控制和恒溫吹風的收縮機作用下收縮溫度是180度---220度之間，速度在常規下2—3米速/分鐘內完成產品收縮包裝；或使用專用噴槍手動收縮完成。
PE Contraction Film(Bag):It is the most widely used contraction film,which applies for packaging portfolio,big commodities such as coca colo24,bottles of mineral water15-24.
Character: It won’t produce the toxic gases in the process of packaging,which is accepted as an environmental contraction film by the world. Good transparency,flexibility,hardy ,good contraction.
Usage:It is widely used in food, beverages, frozengoods, medicine,toys,cosmetics, hardware,machine and so on.
Technical Features of Products: The thickness and specification of the film:40*-200* as required
Longitudinal heat shrinkage rate:50%-75%
Horizontal heat shrinkage rate:10%-30%
State Executed Standard Code:GB/T13519-1992
Production forms: It can be divided into two kinds:sheet material and tube material.The width of the sheet material can be set freely within 4000mm. The tube material can be made between 20mm—2000mm according to the requirements.We first make a linear bag(one or two sides welded),and then weld an edge longer than 2mm so than it won’t burst.
Application requirements: The shrinking temperature in the action of a 1200mm tunnel thermostat control and blowing shrinking machine is between 180c-220c. The shrinking package takes up one minute to finish 2-3 meters in a regular condition.Using a spray gun to finish the contraction is also recommended.
